Cargas eletrônicas da CA
Cargas eletrônicas CA programáveis
NH Research, Inc.?s (NHR) AC Electronic Loads include the Carga CA (4600) e Regenerative 4 Quadrant AC Load (9430) which are modular and scalable in power. Both types of AC loads are ideal for linear, non-linear, inductive and capacitive loading test requirements with advanced features.
Each type of AC load has specific features suited for your test requirements and application needs. When selecting between NHR?s AC loads, it is important to consider if your testing would benefit from 4 quadrant capability and regenerative, bi-directional power.
Applications include testing of Vehicle to Grid (V2G), EVSE, military and aerospace, solar and grid-tied inverters, fontes de alimentação ininterrupta (UPS), AC sources, rectifiers, circuit breakers and fuses.
Características principais:
- Modular and scalable power
- Fast response times
- Advanced loading modes (CC, CP, CR, CV & more)
- Advanced Measurements (voltage, current, power)
- Measurement accuracy with separate voltage/current ranges
- Multiple layers of safety, built-in
- Formas de onda definidas pelo usuário
- Sub-cycle transient generation
- Controllable from remote PC
NHR?s electronic loads deliver the power, precision and flexibility needed to meet or exceed your test solution needs.
Carga CA
este AC Load (4600 Series) is 2 quadrant AC load designed for test applications that require linear and non-linear AC loading in several modos de emulação with Power and Crest Factor control. This programmable versatility allows testing with a wide variety of potential field operating conditions to assure unit-under-test (UUT) reliability.
- 6 power ratings
- Scalable power from 3kW up to 36kW
- 0-350Vrms, 1-Phase output*
- CC, CR, CV, CP, SC, UPF & CNL emulation modes
- 100-step macro per cycle loading changes
Regenerative AC Load with 4 Quadrant Capability
NHR?s AC Load 4-Quadrant Operation offers regenerative, bi-directional capability, ideal for simulating almost any complex linear or non-linear load as well as full line disturbances at any power factor. This bi-directional capability significantly expands load simulation relative to 2-quadrant AC loads.
o Carga CA regenerativa (9430) allows creating the reverse current caused by inductive or capacitive loads (low power factors). Power is sent back to the UUT (source) during part of the AC cycle, and accurately duplicates real-world reactive electrical power flows.
- High energy efficiency > 90%
- 8 power ratings
- Scalable power from 12kW up to 96kW
- 0-350Vrms, 0-606VL-L multi-phase output
- CC, CR, CP & CV loading modes
Produtos
