Home › Products › AC & DC Electronic Loads › DC Electronic Loads › Modular DC Electronic Load – 4350 Series

Modular DC Load 500V – 4350 Series

Modular DC Load for Charger Testing, LED Driver Testing, Solar Panel Testing, & More!

Features

  • 3 sizes – 150, 300, & 600W @ 500V with advanced measurement capability built-in
  • Mix & match loads for maximum configuration flexibility
  • Up to 16 loads in a single, 8 3/4″ / 5U Model 4300 chassis
  • Front loaded & front connections
  • 3 voltage and 3 current ranges for improved accuracy
  • High-resolution waveform capture for analysis of dynamic transients
  • Isolated digital inputs & outputs for test fixture support
  • PC/LAN control with LabVIEW & IVI drivers

Quote Request     Data Sheet     Related Products

modular dc load model 4350

Click image for larger view

Applications

The concept of having an advanced digital measurement system built in to each load plus being able to combine up to 16 of such loads into a single chassis opens several new test strategy possibilities that have significant economic and quality benefits.

The most important test strategy is the ability to test consumer power devices such as chargers, adapters and LED drivers in parallel, up to 16 in a single pass. Test times for such devices are now measured in a few seconds.

The other major advantage of this distributed measurement is the ability to test each output of a multi-output power conversion device simultaneously rather than sequentially. Not only does this dramatically reduce the overall test time but also provides far better channel-to-channel performance measurements including dynamic cross effects. In this manner quality of the devices tested takes a large step forward because the parallel tester better simulates real life conditions where all outputs are exercised together.

Yet another benefit of such a flexible load/measurement system is the ability to reconfigure the loading to adapt to almost any new loading arrangement required by brand new UUTs in the future.

Advantages

modular programmable dc electronic load model 4350

  • Modular load maximizes configuration flexibility
  • Simplifies automated test stand development
    – Triggerable set & measurment
    – Short circuit mode & over voltage relay
    – Isolated digital inputs & outputs
    – Built-in SW watchdog & safety limits
  • Software tools to shorten test development time
    – PC-based Softpanel GUI with scope display
    – Supplied LabVIEW & IVI-C/IVI-COM drivers
    – Optional: DC Load, emPower® or Enerchron® test sequencer

Benefits

  • Modular – up to 16 loads or combinations in single chassis
  • Built in features require fewer test devices
  • Front connections simplify wiring
  • Safety limits protect UUT

Model 4350 Modular DC Load (500V) Specifications

Model # 4350-150 4350-300 4350-600
Chassis Slots 1 2 4
Power 150W 300W 600W
Voltage 0 – 500V 0 – 500V 0 – 500V
Current 0 – 30A 0 – 60A 0 – 120A
Physical
Mainframe Size (HxWxD) 8 3/4 x 19 x 22″/222 x 483 x 559mm
Weight 86lbs/39kg (fully loaded)