NH 리서치 (NHR), 인기있는 단일 채널의 고전압 / 고전력 버전 인 새로운 9300 시리즈 출시 9210 시리즈 배터리 테스트 시스템. The 9210 Series provided a 12kW power module operating at 40V, 120V, or 600V and which allowed paralleling with similar systems to increase the power, whereas the new 9300 system provides a 100kW power module with a software-selectable high voltage range (1200VDC / 167A) and high-current range (600VDC / 333A) allowing for efficient testing of single-voltage and double-voltage Electric vehicle (EV) batteries as well as high-voltage Energy Storage Systems (ESS) used in grid-tied applications.
The 9300 further extends NHR’s family of high-power 배터리 테스트 및 에뮬레이션 capabilities which are ideal for analyzing a battery performance under xEV drive cycles and grid-storage profiles such as PJM and time-shifting profiles. Like the successful 9200 and 9210 systems, the 9300 modules are independent allowing for testing of multiple batteries, each with a different test plan, power levels and start/stop times. When higher power is needed, the 9300 modules may be paralleled providing 200kW, 300kW or up to 1.2MW capability. This modular power capability allows a system to be sized to the power levels needed today while ensuring expansion capability should additional power be needed in the future.
The standard 9300 system is outfitted with an internal controller, system software and advanced touch panel for manual control. Through this interface the operator is able to create, run, monitor, chart and report UUT profiles without writing a single line of code. Alternatively, for complex test programs and for tests that require additional data acquisition hardware, users can employ either NH Research’s Enerchron® test sequencer software, or their own custom LabVIEW or Python application using the supplied fully-documented drivers.
The system is highly efficient and regenerative returning more than 90 percent of the energy removed from a battery is returned as usable AC facility power. Regeneration lowers the total utility consumption of the facility, reduces the amount of generated waste-heat, provides a cooler work environment, reduces air conditioning loads and eliminates the need for elaborate water-cooling systems. The operating cost savings from using regeneration typically provides a return on investment within 1-2 years.