dc power supply functional test system s400 series angle

Click image for larger view

Modular Test Systems – S400 Series

Modular Test Systems for Power Supply Production Testing, High Speed Testing, & More!

Features

  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

Quote Request

Applications

The S400 Series Functional Test Systems are modular test systems that are PC-controlled, full-capability and highly flexible modular power supply test systems suitable for high-speed testing of power supplies typically used in high volume consumer applications.

The key to the S400 system’s flexibility, as well as space-saving design, is the modular DC load/source mainframe. This is the portion where flexibility is most often required. What makes this subsystem unique is that the 6-slot chassis will accept any combination of DC electronic loads and/or DC source modules.

Additional flexibility is gained through the ability to synchronously parallel like modules from within a test program to match each supply-under-test’s specific stimulus requirements. In this manner, it is possible to configure a wide range of virtual loads and sources within the chassis’ limits. All modules also have wide operating ranges and constant power operating envelopes to maximize range of requirements through a minimum group of modules.

Models

There are now 3 modular test system models to choose from. The S430 is designed for low-power DC-DC testing and comes with a 6-slot modular DC load/ source mainframe. The S440 is designed for low-power AC-DC testing and contains a 700W AC source in addition to the modular load/source mainframe. The Power Supply Production Tester – S450 Series is configured with a 2700VA AC/DC source for the testing of mid-range power supplies and parallel testing of adapters.

Embedded Measurement System (EMS)

Each S400 Series Functional Test System contains an advanced measurement system within the mainframe. The EMS digitizes analog signals for digital analysis to provide both static and transient measurements from a single waveform capture. In this manner, one circuit replaces the essential functions of a voltmeter, timing/noise analyzer, power analyzer and oscilloscope along with the associated interconnect wiring. Reducing measurement equipment results in a simpler, more compact, faster and less expensive tester.

Configurable with Interchangeable Modules

The key to flexibility, as well as space-saving design, is the modular DC load/source mainframe that had been a fundamental component of larger NHR test systems for many years. This is the portion of all testers where flexibility is most often required. What makes this subsystem unique is that the 6-slot chassis will accept any combination of electronic loads and/or DC source modules.

Additional flexibility is gained through the ability to synchronously parallel like modules from within a test program to match each supply-under-test’s specific stimulus requirements. In this manner, it is possible to configure a wide range of virtual loads and sources within the chassis’ limits. All modules also have wide operating ranges and constant power operating envelopes to allow covering a maximum range of requirements through a minimum group of modules.

S400 Series Power Supply Production Test System Specifications

  • The S430 is designed for low-power DC-DC testing and comes with a 6-slot modular DC load/source mainframe.
  • The S440 is designed for low-power AC-DC testing and embeds a 700W AC source in addition to the modular DC load/source mainframe within a single device.
  • The S450 (link) extends the S430 by adding a higher power AC/DC source or a higher power DC load ideal for testing of mid-range power supplies and parallel testing of adapters.
S400 Test System Instrument Options
Instrument Type & Model #Key Specifications *Test System Model #
Modular DC Sources
610220V/60A/450WS430/440/450
610440V/30A/450WS430/440/450
610880V/15A/450WS430/440/450
6145450V/8A/450WS430/440/450
Modular DC Loads
4100450V/60A/300WS430/440/450
4200120V/60A/300WS430/440/450
AC Source
5400350V/5A RMS/700VAS440
AC/DC Source
5427300V/18A RMS/2.7kVAS450
424V/18A DC/2kW
* Maximum voltage/current corners of Constant Power operating envelopes

More Info

power supply functional test system s450 series

Related Products

  • Universal UPS/Inverter Test System – Model 5500
  • Power Supply Functional Test System – Model 5600
  • Design Verification/Engineering Characterization Tester – Model 5700
  • Universal Calibrator – Model 3100

Application Testing

The S400 Series Modular Test Systems are useful for testing the following products & applications:
Power Supply Testing

Share this: Facebooktwittergoogle_plusredditpinterestlinkedintumblrmailFacebooktwittergoogle_plusredditpinterestlinkedintumblrmail


NH Research, Inc. | 16601 Hale Ave., Irvine, CA 92606 NH Research, Inc. USA Website | Ph: (949) 474-3900 | Email: sales@nhresearch.com | NH Research, Inc. China Website nhresearch.com.cn